A while ago a friend and I got together for a crafty day. One of the things we had a go at was using Pentart light modeling paste through stencils.
It can be used in moulds but is very light and fairly quick drying on a porous surface. We prepared quite a few for later use...
...taking over the living room floor.
I started with a good sprinkle of Brusho and Pixie Powders, spritzing with water to get the background going. You can see a bit of the sheen from the Pixie Powder.
The modeling paste acts as a resist and remains much paler, although the red seemed to stain a bit more. Next I used gilding wax on the paste.
I didn't feel I had quite the depth I wanted so I added a bit of stencilling.
Finally a few white splatters tied it all together.
They have a really nice textured finish, very tactile indeed.
Thank you for taking the time to stop by. Do let me know what you think, your comments are always welcome xxx